SR fast road engine....NEWS!!!

[Gary@APT]

just thought id keep you updated...

after lots of searching for a good engine to allow us to have one on the shelf we finally found one :nod: :nod:

im looking at it being ready mid to the end of jan,

this will mean that will only be hopefully a day to swap so drive in and out in ONE day!!!!

we will still keep the price the same for next year as this year.

so £3200 inc vat fitted

and engine will include

recon head,metal headgasket,forged pistons,new timing chain and tensioner,lightened and balanced bottom end,lightened flywheel,recon oil pump,new main bearings,new big end bearings,new thrust washers,new nissan gasket kit,etc......

[Colin Gibson]

Gary,
Any thoughts of doing an uprated head for higher revs, with springs, solid lifters, etc... and some porting?

You could perhaps sell complete uprated heads for straight swapping.

Just a thought, since (by all reports) the head seems to be the weaker area on the S14 SR, needing attention before the bottom end (at least as far as high revving is concerned)

If the new head was then placed on a standard bottom end, (maybe with a thicker metal HG) and big/medium turbo with tubular manifold,
then revs increased and mapped up to say 8000, this could perhaps produce a very nice Big power band and high peak power figure (very 'streetable' as they say)
all for a reasonable price :D

Only a wee idea! :p

.

[Matt_T]

good idea, I'd be more interested in an uprated head than bottom end :nod:

[Gary@APT]

i can do that no prob its just the cost of top end components.

also people always want different cam profiles.

but i can get a ported and polished head done for stock but just will be bare pllus anyone after any head spec can order it as we got to bare heads now.

[david_t]

Extremely good price for what you get, top work :thumbs: now I know how much to keep in the bank if my car goes boom.

[200sxer]

Old post being brought up I know...

Anyway did this ever take off?

Also what power would this engine be giving?

[Gary@APT]

yes it did we try to keep one in stock at all times

we have just fitted a couple so will be mid jan when another one is done

you can always pay a deposit for it so its reserved

as for power the engine gives would be depending on turbo etc,but will take
safely 350-400bhp

[200sxer]

yes it did we try to keep one in stock at all times

we have just fitted a couple so will be mid jan when another one is done

you can always pay a deposit for it so its reserved

as for power the engine gives would be depending on turbo etc,but will take
safely 350-400bhp


Sounds cool...

Probably a dumb question but,I have a stage 2 from HD, will this swap keep everything as is, just provide me with a stronger unit to add up the power, in other words I won't need it remapped...

[Gary@APT]

stages in engine have nothing to do with stages in chips

its just how we name our engines