stage 2 with cams

[podge]

would your stage 2 work well with a set of reprofiled 260 degree cams?? does every chip you sell come with a bracket for it to sit in?

[Jez]

All my chips come with a socket.

The chips are all mapped for standard cams, so if you ran one with reprofiled cams I can't be 100% sure what would happen. The engine will run fine, but you may find that it isn't optimal.

[podge]

does the chip adjust the timing or would i need to do that?? and what would it be set too

[Jez]

The chip modifies the fuel and ignition maps. You need to set the ignition timing at idle to 14-15 deg BTDC. You may have to retard or advance it - it depends on your engine and its setup. You must not allow your engine to detonate - if it does you need to retard the ignition or reduce the boost pressure.