Advice please

[Terror]

Ok as im rebuilding my engine over the winter i will be requiring an upgrade. When back on the road my speck will be

Apex cat back
Apex decat and front pipe
Apex fmic
walbro
Denso plugs
ind kit
fse power boost valve
Apexi SAFC
T28 roller bearing turbo (from bren)
Wiseco pistons
Pauter rods
2mm H/G

I am currently running a stage 2 chip. I would like you to supply me with z32 afm and 444 injectors plus appropriate chip. Will this be a stage 3? I only want stage 3 for the time being but while im rebuilding the engine im overkilling it for a later date. If that makes any sense.

[Jez]

Hi mate

If you want to run a Z32 AFM and 444cc injectors you'll need a stage 3 chip.

I've got the stage 3 chip and Z32 AFMs in stock at the moment. No injectors though.

The stage 3 + AFM is £300 - email me if you're interested and I'll keep an eye out for for some injectors.

Cheers :)
Jez

[Terror]

What boost and timing would i need to be running for the chip to be running properly?

[Jez]

It'll run fine on anything up to around 17-18psi :)

[Terror]

And will the stage 3 chip fit into the socket that im running my stage 2 in?

[Jez]

Just noticed you're running a 2mm head gasket - you'll probably be able to run more than 17-18psi with that.

Yes, the stage 3 chip will fit directly in the ECU socket.